Welcome To Evlithium
Best Store For Lithium Iron Phosphate (LiFePO4) Battery
lithium battery supplier
Home > TC Elcon Charger>800W On Board Battery Charger

24V 48V 60V 800W On Board Battery Charger


800w on board battery Charger 800w lithium battery charger


The battery charger adopts fully closed pouring and sealing heat-conducting silica gel process, with protection grade up to IP67, good shock resistance, good heat dissipation performance and long service life.The products are applicable to lithium battery, lead-acid battery, nickel metal hydride battery, etc., and can be used for battery pack cycle charging of electric vehicles, motorcycles, sightseeing vehicles, forklifts, logistics vehicles, golf carts, ships, communication equipment, etc.

Models

Input Voltage
Range

Rated Output
Voltage

Max Output
Current

SMCZ7-2415A

AC180V~260V

24V

15A

SMCZ7-4815A

AC180V~260V

48V

15A

SMCZ7-6012A

AC180V~260V

60V

12A



Technical Parameters 

Item

Parameters

AC Input Wide Voltage, Range

AC180V~260V

AC Input Frequency Range

40~70Hz

With APFC Function, Power Factor

¡Ý0.98

Soft Switching Technology, Efficiency

¡Ý93%

Protection Level

IP67

Operating Temperature

-40¡æ~60¡æ

Storage Temperature

-55¡æ~100¡æ

CAN Communication Function

Optional

12V3A Auxiliary Power Supply

Optional

LED Light Indicator For Charging Process

Standard

Noise

¡Ü45dB

Overall Size

190*140*74.5mm

Net Weight

2.0Kg



Protection Function


1.Overheat Protection
 
When the internal temperature of the charger exceeds 80¡æ, the charging current will reduce automatically. When it exceeds 85¡æ, the charger shut down for protection. When the temperature drop, the charger antomatically resumes to charge.

2.Short Circuit Protection
   
When the output short circuit, the charger will automatically shut down the output. After troubleshooting, the battery can be reconnected to resume charging.

3.Battery Reverse Connection Protection

When the battery is reverse connected, the internal circuit of the charger will automatically disconnect from the battery, without charging, without damaging the charger.

4.Input low-voltage &Over-voltage Protection

If the input voltage is lower than 90V or higher than 264V, the charger will shut down protectively and automatically resume working with the voltage is normal again.

5.Full Automatic Shutdown

Automatically shut down after full charge.


Contact us
Homepage
Fold