Fortune LiFePO4 Battery 3.2V 110Ah Prismatic Battery Cell
Features of Fortune LiFePO4 Battery cells:
-
¡Ý4,000 cycles at 80% Depth of Discharge at 0.5C
-
Built with the safest Lithium Iron Phosphate chemistry in prismatic aluminum cells
-
Nanometer LiFePO4 cathode ensures durability, higher power output performance, and superior lowtemperature performance
-
2C constant discharge rate outperforms normal 1C rate batteries
-
Consistency of each individual cell maximizes packs capacity
-
Copper stud terminal design, no welding needed, can use an impact gun
-
Built to last, ideal for powering heavy-duty industrial vehicles and machines
Item
|
Parameters
|
Capacity£¨Ah£©
|
112Ah
|
Nominal voltage(V)
|
3.2
|
Energy
|
358Wh
|
Dimension
|
130 x 36 x290mm
|
Weight£¨Kg£©
|
2.85kg
|
Terminal Type
|
M10 Copper Nickel Bolt
|
DC Resistance
|
¡Ü1m¦¸
|
Max Peak Current (for 3 seconds)
|
550A
|
Operating voltage range(V)
|
2.2¡«3.65
|
Operating temperature range(¡æ)
|
-20¡«50¡æ
|
Maximum charge rate (Continued)
|
1C
|
Recommended Charging Current
|
¡Ü 55A
|
Max Peak Current (for 10 seconds)
|
220A
|
Cycle life£¨times£©
|
80%DOD¡Ý4000 times
|
PERFORMANCE CURVES
Precautions and Safety Instructions
1 Standard cell Precautions
a. Do not expose the cell to extreme heat or flame.
b. Do not short circuit, over-charge or over-discharge the cell.
c. Do not subject the cell to strong mechanical shocks.
d. Do not immerse the cell in water or sea water, or get it wet..
f. Do not disassemble or modify the cell.
g. Do not handle or store with metallic like necklaces, coins or hairpins, etc.
h. Do not use the cell with conspicuous damage or deformation.
i. Do not connect cell to the plug socket or car-cigarette-plug.
j. Do not make the direct soldering onto a cell.
k. Do not touch a leaked cell directly.
l. Do not use for other equipment.
m. Do not use Lithium-ion cell in mixture.
n. Do not use or leave the cell under the blazing sun (or in heated car by sunshine).
o. Keep cell away from children.
p. Do not drive a nail into the cell, strike it by hammer or tread it.
q. Do not give cell impact or fling it.
2.Cell Operation Instructions
2.1 Charging
a. Charge the cell in a temperature range of 0¡ãC to + 50¡ãC.
b. Charge the cell at a constant current of 0.3Cuntil 3.65V, and then at a constant voltage of 3.65V until
0.05C. Charge rates greater than 1C are NOT recommended. (C : Rated Capacity of cell)
c. Use a constant current, constant voltage (CC/CV) lithium-ion (Li+) cell charge controller.
d. Do not continue to charge cell over specified time. ¡£
2.2 Discharging
a. Recommended cut-off voltage to 2.2V. Recommended max continuous discharge current is 3C¡£
b. For maximum performance, discharge the cell in a temperature range of -20¡ãC to +50¡ãC.
2.3 Storage Recommendations
In case of long period storage (more than 3 months), storage the
cell at temperature range of ¨C10 ~ +45¡ãC, low humidity, no corrosive gas atmosphere£¬No press
on the cell£»And more than 3 months need to put a charge according to the standard charge and
discharge process