T-P48100ESA1 48V 100Ah 4.8Kwh LiFepO4 Battery Pack

High Safety
Long Cycle Life
Easy Installation
Intelligent Anti-theft

Application Scenarios

Provide safe and reliable backup power for base station primary equipment, capable of integrating with third-party power sources or site monitoring equipment protocols, achieving lithium batterystatus/alert information reporting, intelligent software anti-theft and other functions.

Parameters

Items	Parameters
Rated Capacity(Ah)	100
Rated Energy (kWh)	4.8
Rated Voltage (V)	48
Operating Voltage Range (V)	42~54
Max. Continuous Charge/Discharge Current (A)	100 / 100
Cycle Life	3500@80%DOD, 35℃
Weight (kg)	38
Dimension (WDH)(mm)	442480130 (3U, excluding handles and mounting ears)
Communication Interface	CAN/RS485 and 2 Dry Contact
Status Indication	SOC / ALM / RUN
Max. Module Parallel Connect	16
Authenticate	IEC62619, IEC62620, CE, UN38.3
Ingress Protection	IP20
Operating Temperature (°C)	Charge: 0~55; Discharge: -20~ 55
Optional Features	LCD Display, Circuit Breakers, Fuses, Heating, Fire Protection, Gyroscope, GPS

WARNING AVERTISSEMENT

Do not disassemble or alter the battery in any way.
Do not use the battery for purposes not described in its documentation.
Do not drop, strike, puncture, or step on the battery.
In case of electrolyte leakage, keep leaked electrolyte away from contact with eyes or skin, immediately clean with water and seek help from a doctor.
Do not put the battery into a fire. Do not use it or leave it in a place near fire, heaters, or high temperature sources.
Do not submerge the battery in water, or expose it to moisture.
Do not allow the terminals to contact exposed wire or metal.
The battery is heavy and can cause injury if not handled safely.
Keep out of reach of children or animals.

Previous：
CATL 3.2V 314Ah LiFePO4 Battery Cell For ESS

Next：
IFP2770134AC 3.2V 23Ah LiFePO4 Battery