Deye 50kW/60KWh High Voltage All-in-one Hybrid Battery Energy Storage System

Model

GE-F60

System Specification

Model

GE-F60-V1

AC Output Frequency and Voltage

50/60Hz; 3L/N/PE 220/380, 230/400Vac

Grid Type

Three phase

Energy Configuration (kWh)

61.4

Dimension (W x D x H,mm)

735x1050x2250（no contain inverter）

Weight Appr. (kg)

950（battery）+80（inverter）

AC Output Rated Current (A)

75.8

Battery Operating Voltage (V)

500 ~ 700

Max. charging/discharging efficiency

91%

Battery Chemistry

LiFePO4

IP Rating of Enclosure

IP55

Installation Style

Floor-Mounted

Warranty

10 years

Inverter Technical Specification

Max. PV Input Power (W)

65000

Max. PV Input Current (A)

36+36+36+36

Rated PV Input Voltage (Vdc)

600

Start Up DC Voltage (Vdc)

180

MPPT Voltage Range (Vdc)

150-850

Max. PV Short-circuit Current (A)

55+55+55+55

Number of MPPT

4

Peak Power (off grid)

1.5 time of rated power, 10s

Power Factor

0.8 leading to 0.8 lagging

THD

<3%

DC injection current (mA)

<0.5%ln

Display

LCD

Operating Temperature Range (℃)

-40~60( >45℃ derating)

Relative Humidity

15% ~ 85% (No Condensing)

Dimension (W x D x H,mm)

527x294x894

Inverter Communication

CAN,RS485,WIFI,ETH

Max. Efficiency

97.6%

MPPT Efficiency

99.9%

Battery Technical Specification

Battery Module Nominal Voltage (V)

51.2

Battery Module Energy (kWh)

5.12

BMS Communication

CAN

Battery Module Dimension(W*D*H mm)

440x570x133

Battery Module Weight (kg)

44

Operating Temperature Range

Charge: 0～55℃ / Discharge: -20℃～55℃

Cycle Life

≥6000(@25℃±2℃,0.5C/0.5C,70%EOL)

Battery Module Certification

CE, IEC62619, IEC62040, UN38.3

①Air conditioner

Cooling the ESS system

②Smoke detector

A device used to detect smoke in a fire and

sound an alarm when smoke is detected.

③Heat detector

A device used to measure temperature and

sound an alarm if it detects excessive

temperature.

④Travel switch

Check whether the ESS system door is closed.

⑤Inverter

A device that converts direct current

generated by a battery into alternating

current.

⑥Aerosol fire extinguishing device

When the ESS is detected to be on fire,

aerosol is emitted to extinguish the fire.

①Fan

Emission of combustible gas

②Combustible gas sensor

Detect combustible gases

③Serial relay

Control system

④Terminal line

For connecting cables

⑤Switching Mode Power Supply

Power source

⑥Temperature and humidity sensor

Used to measure ambient temperature and humidity

⑦Miniature circuit breaker

Controlled power-on and power-off

⑧Relay

Automatic regulation, safety protection, conversion circuit

⑨Water immersion sensor

Check the ESS for water leakage

⑩Terminal line

Connect external cables

①Aerosol fire extinguishing device

When the pack is detected to be on fire, aerosol is

emitted to extinguish the fire

②Battery module

Provides electrical energy storage and output

③CCS

Cells Contact System

④Air inlet

Cold air inlet

⑤Battery negative-

/

⑥Battery positive+

/

⑦Fan

Promote internal and external air flow

⑧BMU

Battery monitoring

①B-

Connection position of the common negative pole of the battery

②B+

Connection position of the common positive pole of the battery

③Air switch

Used to manually control the connection between the battery rack and external devices

④ALRM light indicator

Battery system fault alarm indicator

⑤HV light indicator

High-voltage hazard indicator

⑥PCS-

Connection position of PCS negative pole

⑦PCS+

Connection position of PCS positive pole

⑧USB

BMS upgrade interface and storage expansion interface

⑨OUT COM

Connection position with next HVB-100A 750V communication output

⑩IN COM

Connection position with previous HVB-100A750V communication input

⑪PCS COM

Communication interface with charging and discharging equipment

⑫START

A start switch of 12VDC power inside the high-voltage control box

⑬COMM1

Communicative connection with the cabinet

⑭COMM2

Communicative connection with the first battery module;

and providing 12VDC power for the first battery module.