48V 100Ah Wall mounted LiFePO4 Battery For Home Energy Storage Sytem

EVL Home U series is a lithium iron phosphate battery based system designed for household applications with excellent performance, high safety and reliability.

wall mounted battery 48v 100ah 48v 100ah lifepo4 battery for home ess

Features of 48V 100ah LiFePO4 Battery Pack:

● Longer Cycle Life: Offers up to 10 times longer cycle life and 5 times longer float/calendar life than lead acid battery. Helping to minimize replacement cost and reduce total cost of ownership.

● Lighter Weight: About 40% of the weight of a comparable lead acid battery. A ”drop in” replacement for lead acid battery.

● Higher Power: Delivers twice power of lead acid battery, even high discharge rate, while maintain high energy capacity.

● Wider Temperature Range: -20℃~60℃

● Superior Safety: Lithium iron phosphate chemistry eliminates the risk of explosion or combustion due to high impact, over charging or short circuit situation.

● No Memory Effect: Support unstable partial state of charge (UPSOC) (charge/discharge) utilization.

Specification:

Model		NE-48D100-WP
Electrical Characteristics	Nominal Voltage	48V
	Nominal Capacity	100Ah
	Energy	4800Wh
	Internal Resistance	≤100mΩ (without BMS)
	Cycle Life	≥5000 cycles（25℃ 80%DOD）
	Design Life	≥10 years @25℃
	Self-Discharge (90 days)	≤5%，@25℃
	Efficiency of Charge	≥98%
	Efficiency of Discharge	≥100% @ 0.2C ≥96% @ 0.5C
Charge	Charge Voltage	54.0V±0.5V
	Charge Mode	0.2C to 54.0V, then 54.0V charge current to 0.02C (CC/CV)
	Max. Charge Current	100A
	Charge Cut-off Voltage	56.25V±0.2V
Discharge	Max. Continuous Discharge Current	100A
Discharge	Discharge Cut-off Voltage	42V±0.2V
Environmental	Charge Temperature Range	0℃~60℃
	Discharge Temperature Range	-20℃~60℃
	Optimum Operation Temperature	5℃~45℃
	Storage Temperature	0℃~45℃, ≤85% relative Humidity
	Water Dust Resistance	IP20
Mechanical	Case	Iron (Insulation painting)
	Dimensions (including the handles)	442450156mm
	Weight	45kg
	Gravimetric Specific energy	107Wh/kg
Others	Method	15S Cylindrical cells
	Protocol	RS485 (3 Nos) / RS232/CAN
	SOC Light	4 * LED
	LCD Screen	Optional, the default setting is no screen

Functions of BMS:

● Over charge detection function
● Over discharge detection function
● Over current detection function
● Temperature protection function
● Short circuit detection function
● Balance function

Applications:

Electrical vehicles, Solar/wind energy storage system, UPS, backup power, Telecommunication, Medical equipment, Lighting, etc.

wall mounted lifepo4 battery

Previous：
Pylontech US5000 48V 100Ah Server Rack LiFePO4 Battery

Next：
48V 200Ah 10KWh Wall-mounted LiFePO4 Battery For Home ESS