CATL Cabient Energy Storage System Solutions ESS|C&I Product Introduction

C&I Products – 3.2V 100AH M1C24A LiFePO4 Pouch Cell

100Ah-M1C24A lifepo4 pouch cell

Items	Parameters
Battery Type	LiFePO4 Pouch Cell
Rated Capacity (Ah@0.5CP)	100
Rated Energy (Wh@0.5CP)	320
Rated voltage(V)	3.2
Rated charge and discharge power (W)	160W (0.5CP)
Maximum continuous charge and discharge power (W)	320W(1.0CP)
Operating temperature (℃)	Charge：-10~55; Discharge：-20~55
Size(mm)	T22.5W122.7L360.5mm
Weight(g)	1890
RTE (0.5CP/0.5CP)	≥94%
Cycle life(@0.5C)	6000@80%SOH
Design life (years)	10
Authenticate	GBT36276/UL9540A/IEC62619 /UL1973/UN38.3

100Ah-M1C24A lifepo4 pouch cell

Security Design

Connection detection

Module short circuit protection

Maintenance Convenience Design

Pre-maintenance interface, first-level BMS and Fuse maintenance, without tools

Concise Interface Design

Hidden wiring harness design

Compatibility Design

Module 3U, suitable for 19-inch cabinet
Electrical selection compatible with 1000-1500V

Items	Specifications
Cell Type	LFP, 100Ah
Connection	2 parallel 16 series (2P16S)
Total Capacity/ Energy	200Ah/10.24kWh
Usable/Capacity/Energy	196Ah/10kWh
Nominal Voltage	51.2V
Output Voltage Range	44.8~57.6V
Max. Charge/Discharge Power	5.12kW (0.5CP)
Room Temperature Cycle Life (25℃±2℃)	6000cycles @70%SOH
Module Safety Certification	IEC62619 /UL1973/UL9540A/GBT36276/RCM/CE EMC /FCC
UN Transportation Test Standard	UN38.3
Ingress Protection	IP20
Operating ambient temperature	-10℃~50℃
Optimal operating temperature	15℃~30℃
Operating ambient humidity	5%~95%, No condensation
Storage conditions	30% SOC; 7days @（ -30~-20℃）@（45~60℃）5%~95RH； 6 months @ -20~45℃，5%~95RH
Dimensions	W445D913.2H129 mm(without bracket）
Altitude	≤3000m
Weight	80kg
Installation	Rack-mounted installation

BMS High Voltage Box

Integrated Design

HVB (BMS Control Box) includes BCU, IVU, can support expandable BAMS, ESU, and also adds 24VDC, which can support black start.

Maintenance Convenience Design

Modular PCBA design with convenient expansion for level 2 and 3 (BAMS/ESU).

Hot plug design, PCBA convenience maintenance.

Safety/Reliability Design

Electronics/electrical components are easy to replace, 24VDC dual power backup, improving system reliability.

Insulation detection, loose connection detection.

Compatibility Design

Module 3U, suitable for 19-inch cabinet

Electrical selection compatible with 1000-1500V

Items	Parameters
Model	C-H1500100SA1
Max. Operating Voltage Range	Max. 1500V DC
Max. Input / Output current	120A
Optimal operating temperature	15℃~30℃
Environment temperature range	-10℃~50℃
Communication between HV-BOX and PCS or DC/DC	CAN & RS485 & Ethernet (three ports)
Max. Module Serial Connect	26S
Dimensions	W442D500H217.2 mm
Weight	26kg
Ingress Protection	IP20

Outdoor Battery cabinet

Each battery cabinet contains 2 sets of battery packs, and each battery pack can contain up to 26 serially connected battery cells.
Each battery cabinet is equipped with 2 HVACs and 1 set of aerosol fire suppression system (FFS).
025CP is equipped with a 3kW air conditioner, while 05CP is equipped with a 5kW air conditioner.

Items	Parameters
Total capacity	400Ah
Usable capacity	392Ah
Total energy	532.4kWh
Usable energy	521.8kWh
Nominal voltage	1331.2V
Operating voltage range	1164.8~1497.6 V
Max. Charge/Discharge power	266.2kW (0.5CP)
Room Temperature Cycle Life (25℃±2℃)	6000cycles@70%SOH
Room Temperature Calendar Life(25°C±2℃)	10years
Operating ambient temperature	-30℃~55℃
Optimal operating temperature	15℃~30℃
Operating ambient humidity	5%~95%, No condensation
RTE	≥94% for fresh battery
Discharge rate of Module	≤2%/month/@25℃
Module Series connection/Module	26S
Rack Parallel connection/Rack	Max. 16 units in parallel (025CP)
Ingress Protection rate	IP54/NEMA 3R
Cooling	HVAC
Dimension	W2200mmH2443mmD1400mm
Weight	5800kg
Altitude	≤3000m
Communication between PCS and battery system	CAN & RS485 & Ethernet (three port)
Regulation compliance	IEC62619 /UL1973/GB/T 36276/RCM/CE EMC/FCC
EMC standard	EN61000-6-1&EN61000-6-3
UN Transportation Test Standard	UN3841/Battery cabinet,UN38.3/PACK
Environment protection standard	RoHS，REACH，TSCA，battery directive

Outdoor Combiner cabinet

DC bus: Collect the main circuits of multiple battery cabinets and connect to the PCS.
Auxiliary power supply: Provides power supply for air conditioning and BMS.
Reserved for upper-level communication: Reserved Ethernet switch position to support communication between PCS and EMS

Items	Parameters
Rated voltage	1500V
Max. current (@25℃)	2*800A
Peak current (@25℃)	2*944A@5s
Number of connected battery cabinets	Max. 16 battery cabinets for 0.25CP; 8 battery cabinets for 0.5CP;
Communication port	Ethernet( Eight ports）
Power interfaced to PCS	2 positive and 2 negative ports，6*Φ13
Power interfaced to battery cabinets	2 positive and 2 negative ports，4*Φ8
Distribution port from grid	80A，480VAC(Configurable)，3P+N
Distribution port to battery cabinets	625A, 220VAC，For HVAC,P+N 625A，220VAC，P+N
Distribution port to battery cabinets	210A, 220VAC，For BMS,P+N /BMS，210A，220VAC，P+N
Dimensions (WHD)	180024501000mm
Weight	1400kg
Operating ambient temperature	-30℃~55℃
Operating ambient humidity	5%~95%
Ingress Protection rate	IP55
Cooling	Air forced cooling
Altitude	≤3000m

Cabinet installation

Cabinet installation 2

Advantages of Battery Grouping

Save on shipping costs, transport with batteries: Cabinets can be shipped with batteries, including power connection lines with safe transportation voltage.
Save space, flexible placement: Supports back-to-back installation, side output, and does not require pre-installed cable ducts/cable racks for battery cabinet installation, saving on site costs.
Save on labor, easy installation: Single cabinet installation is simple, and cabinet installation is convenient, quickly supporting grid connection and saving on labor costs.

Previous：
12V Outdoor Lithium Battery Pack

Next：
Customized 300ah 24V LiFePO4 Battery Pack